language.tex

\newlength{\sk}
\setlength{\sk}{-1.5pt}
In this section we formalize the ideas we outlined in the introduction. We start by the definition of types followed by the language and its reduction semantics. The static semantics is the core of our work: we first present a declarative type system that deduces (possibly many) types for well-typed expressions and then the algorithms to decide whether an expression is well typed or not. 

\subsection{Types}

\begin{definition}[Types]\label{def:types} The set of types \types{} is formed by the terms $t$ coinductively produced by the grammar:\vspace{-2mm}
\[
\begin{array}{lrcl}
\textbf{Types} & t & ::= & b\alt t\to t\alt t\times t\alt t\vee t \alt \neg t \alt \Empty 
\end{array}
\]
and that satisfy the following conditions\vspace{-1mm}
\begin{itemize}
\item (regularity) every term has a finite number of different sub-terms;
\item (contractivity) every infinite branch of a term contains an infinite number of occurrences of the
arrow or product type constructors.\vspace{-1mm}
\end{itemize}
\end{definition}
We use the following abbreviations: $
    t_1 \land t_2 \eqdef \neg (\neg t_1 \vee \neg t_2)$, 
    $t_ 1 \setminus t_2 \eqdef t_1 \wedge \neg t_2$, $\Any \eqdef \neg \Empty$.
$b$ ranges over basic types
(e.g., \Int, \Bool),
$\Empty$ and $\Any$ respectively denote the empty (that types no value)
and top (that types all values) types. Coinduction accounts for
recursive types and the condition on infinite branches bars out
ill-formed types such as 
$t = t \lor t$ (which does not carry any information about the set
denoted by the type) or $t = \neg t$ (which cannot represent any
set). 
It also ensures that the binary relation $\vartriangleright
\,\subseteq\!\types^{2}$ defined by $t_1 \lor t_2 \vartriangleright
t_i$, $t_1 \land t_2 \vartriangleright
t_i$, $\neg t \vartriangleright t$ is Noetherian.
This gives an induction principle on $\types$ that we
will use without any further explicit reference to the relation.\footnote{In a nutshell, we can do proofs by induction on the structure of unions and negations---and, thus, intersections---but arrows, products, and basic types are the base cases for the induction.} 
We refer to $ b $, $\times$, and $ \to $ as \emph{type constructors}
and to $ \lor $, $ \land $, $ \lnot $, and $ \setminus $
as \emph{type connectives}.

The subtyping relation for these types, noted $\leq$, is the one defined
by~\citet{Frisch2008} to which the reader may refer. A detailed description of the algorithm to decide it can be found in~\cite{Cas15}.
For this presentation it suffices to consider that
types are interpreted as sets of \emph{values} ({i.e., either
constants, $\lambda$-abstractions, or pair of values: see
Section~\ref{sec:syntax} right below) that have that type, and that subtyping is set
containment (i.e., a type $s$ is a subtype of a type $t$ if and only if $t$
contains all the values of type $s$). In particular, $s\to t$
contains all $\lambda$-abstractions that when applied to a value of
type $s$, if their computation terminates, then they return a result of
type $t$ (e.g., $\Empty\to\Any$ is the set of all
functions\footnote{\label{allfunctions}Actually, for every type $t$,
all types of the form $\Empty{\to}t$ are equivalent and each of them
denotes the set of all functions.} and $\Any\to\Empty$ is the set
of functions that diverge on every argument). Type connectives
(i.e., union, intersection, negation) are interpreted as the
corresponding set-theoretic operators (e.g.,~$s\vee t$ is the
union of the values of the two types). We use $\simeq$ to denote the
symmetric closure of $\leq$: thus $s\simeq t$ means that $s$ and $t$ denote the same set of values and, as such, they are semantically the same type.

\subsection{Syntax}\label{sec:syntax}
The expressions $e$ and values $v$ of our language are inductively generated by the following grammars:\vspace{-2mm}
\begin{equation}\label{expressions}
\begin{array}{lrclr}  
  \textbf{Expr} &e &::=& c\alt x\alt ee\alt\lambda^{\wedge_{i\in I}s_i\to t_i} x.e\alt \pi_j e\alt(e,e)\alt\tcase{e}{t}{e}{e}\\%[1mm]
  \textbf{Values} &v &::=& c\alt\lambda^{\wedge_{i\in I}s_i\to t_i} x.e\alt (v,v)\\[-2mm]
\end{array}
\end{equation}
for $j=1,2$. In~\eqref{expressions}, $c$ ranges over constants
(e.g., \texttt{true}, \texttt{false}, \texttt{1}, \texttt{2},
...) which are values of basic types (we use $\basic{c}$ to denote the
basic type of the constant $c$); $x$ ranges over variables; $(e,e)$
denote pairs and $\pi_i e$ their projections; $\tcase{e}{t}{e_1}{e_2}$
denotes the type-case expression that evaluates either $e_1$ or $e_2$
according to whether the value returned by $e$ (if any) is of type $t$
or not; $\lambda^{\wedge_{i\in I}s_i\to t_i} x.e$ is a value of type
$\wedge_{i\in I}s_i\to t_i$ and denotes the function of parameter $x$
and body $e$. An expression has an intersection type if and only if it
has all the types that compose the intersection. Therefore,
intuitively, $\lambda^{\wedge_{i\in I}s_i\to t_i} x.e$ is a well-typed
value if for all $i{\in} I$ the hypothesis that $x$ is of type $s_i$
implies that the body $e$ has type $t_i$, that is to say, it is well
typed if $\lambda^{\wedge_{i\in I}s_i\to t_i} x.e$ has type $s_i\to
t_i$ for all $i\in I$. Every value is associated to a type: the type of $c$ is $\basic c$; the type of
 $\lambda^{\wedge_{i\in I}s_i\to t_i} x.e$ is $\wedge_{i\in I}s_i\to t_i$; and, inductively,
the type of a pair of values is the product of the types of the
values.



\subsection{Dynamic semantics}\label{sec:opsem}

The dynamic semantics is defined as a classic left-to-right call-by-value reduction for a $\lambda$-calculus with pairs, enriched with specific rules for type-cases. We have the following  notions of reduction:\vspace{-2mm}
\[
\begin{array}{rcll}
  (\lambda^{\wedge_{i\in I}s_i\to t_i} x.e)v &\reduces& e\subst x v\\[-.4mm]
  \pi_i(v_1,v_2) &\reduces& v_i & i=1,2\\[-.4mm]
  \tcase{v}{t}{e_1}{e_2} &\reduces& e_1 &v\in t\\[-.4mm] 
  \tcase{v}{t}{e_1}{e_2} &\reduces& e_2 &v\not\in t\\[-2mm]
\end{array}
\]
The semantics of type-cases uses the relation $v\in t$ that we
informally defined in the previous section. We delay its formal
definition to Section~\ref{sec:type-schemes} (where it deals with some corner cases for negated arrow types). Contextual reductions are
defined by the following evaluation contexts:\\[1mm]
\centerline{\(
%\[
\Cx[] ::= [\,]\alt \Cx e\alt v\Cx \alt (\Cx,e)\alt (v,\Cx)\alt \pi_i\Cx\alt \tcase{\Cx}tee
%\]
\)}\\[1mm]
As usual we denote by $\Cx[e]$ the term obtained by replacing $e$ for
the hole in the context $\Cx$ and we have that $e\reduces e'$ implies
$\Cx[e]\reduces\Cx[e']$.

\subsection{Static semantics}\label{sec:static}

While the syntax and reduction semantics are, on the whole, pretty
standard, for the type system we will have to introduce several
unconventional features that we anticipated in
Section~\ref{sec:challenges} and are at the core of our work. Let
us start with the standard part, that is the typing of the functional
core and the use of subtyping, given by the following typing rules:\vspace{-1mm}
\begin{mathpar}
  \Infer[Const]
      { }
      {\Gamma\vdash c:\basic{c}}
      { }
  \quad
  \Infer[App]
      {
        \Gamma \vdash e_1: \arrow {t_1}{t_2}\quad
        \Gamma \vdash e_2: t_1
      }
      { \Gamma \vdash {e_1}{e_2}: t_2 }
      { }
  \quad
  \Infer[Abs+]
      {{\scriptstyle\forall i\in I}\quad\Gamma,x:s_i\vdash e:t_i}
      {
      \Gamma\vdash\lambda^{\wedge_{i\in I}\arrow {s_i} {t_i}}x.e:\textstyle \bigwedge_{i\in I}\arrow {s_i} {t_i}
      }
      { }
%      \Infer[If]
%            {\Gamma\vdash e:t_0\\
%            %t_0\not\leq \neg t \Rightarrow
%            \Gamma \cvdash + e t e_1:t'\\
%            %t_0\not\leq t \Rightarrow
%            \Gamma \cvdash - e t e_2:t'}
%            {\Gamma\vdash \ite {e} t {e_1}{e_2}: t'}
%            { }
\vspace{-2mm} \\
      \Infer[Sel]
  {\Gamma \vdash e:\pair{t_1}{t_2}}
  {\Gamma \vdash \pi_i e:t_i}
  { }
  \qquad
  \Infer[Pair]
  {\Gamma \vdash e_1:t_1 \and \Gamma \vdash e_2:t_2}
  {\Gamma \vdash (e_1,e_2):\pair {t_1} {t_2}}
  { }
  \qquad
    \Infer[Subs]
      { \Gamma \vdash e:t\\t\leq t' }
      { \Gamma \vdash e: t' }
      { }
  \qquad\vspace{-3mm}
\end{mathpar}
These rules are quite standard and do not need any particular explanation besides those already given in Section~\ref{sec:syntax}. Just notice that we used a classic subsumption rule (i.e., \Rule{Subs}) to embed subtyping in the type system. Let us next focus on the unconventional aspects of our system, from the simplest to the hardest.

The first unconventional aspect is that, as explained in
Section~\ref{sec:challenges}, our type assumptions are about
expressions. Therefore, in our rules the type environments, ranged over
by $\Gamma$, map \emph{expressions}---rather than just variables---into
types. This explains why the classic typing rule for variables is replaced by a more general \Rule{Env} rule defined below:\vspace{-1mm}
\begin{mathpar}
  \Infer[Env]
      { }
      { \Gamma \vdash e: \Gamma(e) }
      { e\in\dom\Gamma }
  \qquad
  \Infer[Inter]
      { \Gamma \vdash e:t_1\\\Gamma \vdash e:t_2 }
      { \Gamma \vdash e: t_1 \wedge t_2 }
      { }\vspace{-3mm}
\end{mathpar}
The \Rule{Env} rule is coupled with the standard intersection introduction rule \Rule{Inter}
which allows us to deduce for a complex expression the intersection of
the types recorded by the occurrence typing analysis in the
environment $\Gamma$ with the static type deduced for the same
expression by using the other typing rules. This same intersection
rule is also used to infer the second unconventional aspect of our
system, that is, the fact that $\lambda$-abstractions can have negated
arrow types, as long as these negated types do not make the type deduced for the function empty:\vspace{-1mm}
\begin{mathpar}
  \Infer[Abs-]
      {\Gamma \vdash \lambda^{\wedge_{i\in I}\arrow {s_i} {t_i}}x.e:t}
      { \Gamma \vdash\lambda^{\wedge_{i\in I}\arrow {s_i} {t_i}}x.e:\neg(t_1\to t_2)  }
      { (t\wedge\neg(t_1\to t_2))\not\simeq\Empty }\vspace{-3mm}
\end{mathpar}
%\beppe{I have doubt: is this safe or should we play it safer and
%  deduce $t\wedge\neg(t_1\to t_2)$? In other terms is is possible to
%  deduce two separate negation of arrow types that when intersected
%  with the interface are non empty, but by intersecting everything
%  makes the type empty? It should be safe since otherwise intersection
%  would not be admissible in semantic subtyping (see Theorem 6.15 in
%  JACM), but I think we should doube ckeck it.}
As explained in Section~\ref{sec:challenges}, we need to be able to
deduce for, say, the function $\lambda^{\Int\to\Int} x.x$ a type such
as $(\Int\to\Int)\wedge\neg(\Bool\to\Bool)$ (in particular, if this is
the term $e$ in equation \eqref{bistwo} we need to deduce for it the
type $(\Int\to t)\wedge\neg(\Int\to\neg\Bool)$, that is,
$(\Int\to t)\setminus(\Int\to\neg\Bool)$ ). But the sole rule \Rule{Abs+}
above does not allow us to deduce  negations of
arrows for abstractions: the rule \Rule{Abs-} makes this possible. As an aside, note that this kind
of deduction was already present in the system by~\citet{Frisch2008}
though it that system this presence was motivated by the semantics of types rather than, as in our case,
by the soundness of the type system.

Rules \Rule{Abs+} and \Rule{Abs-} are not enough to deduce for
$\lambda$-abstractions all the types we wish. In particular, these
rules alone are not enough to type general overloaded functions. For
instance, consider this simple example of a function that applied to an
integer returns its successor and applied to anything else returns
\textsf{true}:\\[1mm]
\centerline{\(
%\[
\lambda^{(\Int\to\Int)\wedge(\neg\Int\to\Bool)} x\,.\,\tcase{x}{\Int}{x+1}{\textsf{true}}
%\]
\)}\\[1mm]
Clearly, the expression above is well typed, but the rule \Rule{Abs+} alone
is not enough to type it. In particular, according to \Rule{Abs+} we
have to prove that under the hypothesis that $x$ is of type $\Int$ the expression
$(\tcase{x}{\Int}{x+1}{\textsf{true}})$ is of type $\Int$, too.  That is, that under the
hypothesis that $x$ has type $\Int\wedge\Int$ (we apply occurrence
typing) the expression $x+1$ is of type \Int{} (which holds) and that under the
hypothesis that $x$ has type $\Int\setminus\Int$, that is $\Empty$
(we apply once more occurrence typing), \textsf{true} is of type \Int{}
(which \emph{does not} hold). The problem is that we are trying to type the
second case of a type-case even if we know that there is no chance that, when $x$ is bound to an integer,
that case will be ever selected. The fact that it is never selected is witnessed
by the presence of a type hypothesis with  $\Empty$ type. To
avoid this problem (and type the term above) we add the rule
\Rule{Efq} (\emph{ex falso quodlibet}) that allows the system to deduce any type
for an expression that will never be selected, that is, for an
expression whose type environment contains an empty assumption:
\begin{mathpar}
  \Infer[Efq]
  { }
  { \Gamma, (e:\Empty) \vdash e': t }
  { }\vspace{-3mm}
\end{mathpar}
Once more, this kind of deduction was already present in the system
by~\citet{Frisch2008} to type full fledged overloaded functions,
though it was embedded in the typing rule for the type-case. Here we
need the rule \Rule{Efq}, which is more general, to ensure the
property of subject reduction.
%\beppe{Example?}

Finally, there is one last rule in our type system, the one that
implements occurrence typing, that is, the rule for the
type-case:\vspace{-1mm}
\begin{mathpar}
    \Infer[Case]
        {\Gamma\vdash e:t_0\\
        %t_0\not\leq \neg t \Rightarrow
        \Gamma \evdash e t \Gamma_1 \\ \Gamma_1 \vdash e_1:t'\\
        %t_0\not\leq t \Rightarrow
        \Gamma \evdash e {\neg t} \Gamma_2 \\ \Gamma_2 \vdash e_2:t'}
        {\Gamma\vdash \tcase {e} t {e_1}{e_2}: t'}
        { }\vspace{-3mm}
\end{mathpar}
The rule \Rule{Case} checks whether the expression $e$, whose type is
being tested, is well-typed and then performs the occurrence typing
analysis that produces the environments $\Gamma_i$'s under whose
hypothesis the expressions $e_i$'s are typed. The production of these
environments is represented by the judgments $\Gamma \evdash e
{(\neg)t} \Gamma_i$. The intuition is that when $\Gamma \evdash e t
\Gamma_1$ is provable then $\Gamma_1$ is a version of $\Gamma$
extended with type hypotheses for all expressions occurring in $e$,
type hypotheses that can be deduced assuming that the test $e\in t$
succeeds. Likewise, $\Gamma \evdash e {\neg t} \Gamma_2$ (notice the negation on $t$) extends
$\Gamma$ with the hypothesis deduced assuming that $e\in\neg t$, that
is, for when the test $e\in t$ fails.

All it remains to do is to show how to deduce judgments of the form
$\Gamma \evdash e t \Gamma'$. For that we first define how
to denote occurrences of an expression. These are identified by paths in the
syntax tree of the expressions, that is, by possibly empty strings of
characters denoting directions starting from the root of the tree (we
use $\epsilon$ for the empty string/path, which corresponds to the
root of the tree).

Let $e$ be an expression and $\varpi\in\{0,1,l,r,f,s\}^*$ a
\emph{path}; we denote $\occ e\varpi$ the occurrence of $e$ reached by
the path $\varpi$, that is (for $i=1,2$, and undefined otherwise)
%% \[
%% \begin{array}{l}
%% \begin{array}{r@{\downarrow}l@{\quad=\quad}l}
%% e&\epsilon & e\\
%% e_0e_1& i.\varpi & \occ{e_i}\varpi\qquad i=0,1\\
%% (e_0,e_1)& l.\varpi & \occ{e_0}\varpi\\
%% (e_0,e_1)& r.\varpi & \occ{e_1}\varpi\\
%% \pi_1 e& f.\varpi & \occ{e}\varpi\\
%% \pi_2 e& s.\varpi & \occ{e}\varpi\\
%% \end{array}\\
%% \text{undefined otherwise}
%% \end{array}
%% \]
\[
\begin{array}{r@{\downarrow}l@{\quad=\quad}lr@{\downarrow}l@{\quad=\quad}lr@{\downarrow}l@{\quad=\quad}l}
e&\epsilon & e & (e_0,e_1)& l.\varpi & \occ{e_0}\varpi &\pi_1 e& f.\varpi & \occ{e}\varpi\\
e_0e_1& i.\varpi & \occ{e_i}\varpi \quad\qquad& (e_0,e_1)& r.\varpi & \occ{e_1}\varpi \quad\qquad&
\pi_2 e& s.\varpi & \occ{e}\varpi\\
\end{array}
\]
To ease our analysis we used different directions for each kind of
term. So we have $0$ and $1$ for the function and argument of an
application, $l$ and $r$ for the $l$eft and $r$ight expressions forming a pair,
and $f$ and $s$ for the argument of a $f$irst or of a $s$econd projection. Note also that we do not consider occurrences
under $\lambda$'s (since their type is frozen in their annotations) and type-cases (since they reset the analysis).

The judgments  $\Gamma \evdash e t \Gamma'$ are then deduced by the following two rules: \begin{mathpar}
%        \Infer[Base]
%            { \Gamma \vdash e':t' }
%            { \Gamma \cvdash p e t e':t' }
%            { }
%            \qquad
%        \Infer[Path]
%            { \pvdash \Gamma p e t \varpi:t_1 \\ \Gamma,(\occ e \varpi:t_1) \cvdash p e t e':t_2 }
%            { \Gamma \cvdash p e t e':t_2 }
%            { }
    \Infer[Base]
      { }
      { \Gamma \evdash e t \Gamma }
      { }
    \qquad
    \Infer[Path]
      { \pvdash {\Gamma'} e t \varpi:t' \\ \Gamma \evdash e t \Gamma' }
      { \Gamma \evdash e t \Gamma',(\occ e \varpi:t') }
      { }
\end{mathpar}
These rules describe how to produce by occurrence typing the type
environments while checking that an expression $e$ has type $t$. They state that $(i)$ we can
deduce from $\Gamma$ all the hypothesis already in $\Gamma$ (rule
\Rule{Base}) and that $(ii)$ if we can deduce a given type $t'$ for a particular
occurrence $\varpi$ of the expression $e$ being checked, then we can add this
hypothesis to the produced type environment (rule \Rule{Path}). The rule
\Rule{Path} uses a (last) auxiliary judgement $\pvdash {\Gamma}  e t
\varpi:t'$ to deduce the type $t'$ of the occurrence $\occ e \varpi$ when
checking $e$ against $t$ under the hypotheses $\Gamma$. This rule \Rule{Path} is subtler than it may appear at
first sight, insofar as the deduction of the type for $\varpi$ may already use
some hypothesis on $\occ e \varpi$ (in $\Gamma'$) and, from an
algorithmic viewpoint, this will imply the computation of a fix-point
(see Section~\ref{sec:typenv}). The last ingredient for our type system is the deduction of the
judgements of the form $\pvdash {\Gamma}  e t \varpi:t'$ where
$\varpi$ is a path to an expression occurring in $e$. This is given by the following set
of rules.
\begin{mathpar}
    \Infer[PSubs]
        { \pvdash \Gamma e t \varpi:t_1 \\ t_1\leq t_2 }
        { \pvdash \Gamma e t \varpi:t_2 }
        { }
        \qquad
    \Infer[PInter]
        { \pvdash \Gamma e t \varpi:t_1 \\ \pvdash \Gamma e t \varpi:t_2 }
        { \pvdash \Gamma e t \varpi:t_1\land t_2 }
        { }
\vspace{-1mm}\\
    \Infer[PTypeof]
        { \Gamma \vdash \occ e \varpi:t' }
        { \pvdash \Gamma e t \varpi:t' }
        { }
        \qquad
    \Infer[PEps]
        { }
        { \pvdash \Gamma e t \epsilon:t }
        { }
        \qquad
\vspace{-1mm}\\
    \Infer[PAppR]
        { \pvdash \Gamma e t \varpi.0:\arrow{t_1}{t_2} \\ \pvdash \Gamma e t \varpi:t_2'}
        { \pvdash \Gamma e t \varpi.1:\neg t_1 }
        { t_2\land t_2' \simeq \Empty  }
\vspace{-1mm}\\
    \Infer[PAppL]
        { \pvdash \Gamma e t \varpi.1:t_1 \\ \pvdash \Gamma e t \varpi:t_2 }
        { \pvdash \Gamma e t \varpi.0:\neg (\arrow {t_1} {\neg t_2}) }
        { }
        \qquad
    \Infer[PPairL]
        { \pvdash \Gamma e t \varpi:\pair{t_1}{t_2} }
        { \pvdash \Gamma e t \varpi.l:t_1 }
        { }
\vspace{-1mm}\\
    \Infer[PPairR]
        { \pvdash \Gamma e t \varpi:\pair{t_1}{t_2} }
        { \pvdash \Gamma e t \varpi.r:t_2 }
        { }
        \qquad
    \Infer[PFst]
        { \pvdash \Gamma e t \varpi:t' }
        { \pvdash \Gamma e t \varpi.f:\pair {t'} \Any }
        { }
        \qquad
    \Infer[PSnd]
        { \pvdash \Gamma e t \varpi:t' }
        { \pvdash \Gamma e t \varpi.s:\pair \Any {t'} }
        { }\vspace{-3mm}
\end{mathpar}
These rules implement the analysis described in
Section~\ref{sec:ideas} for functions and extend it to products.  Let
us comment each rule in detail. \Rule{PSubs} is just subsumption for
the deduction $\vdashp$. The rule \Rule{PInter} combined with
\Rule{PTypeof} allows the system to deduce for an occurrence $\varpi$
the intersection of the static type of $\occ e \varpi$ (deduced by
\Rule{PTypeof}) with the type deduced for $\varpi$ by the other $\vdashp$ rules. The
rule \Rule{PEps} is the starting point of the analysis: if we are assuming that the test $e\in t$ succeeds, then we can assume that $e$ (i.e.,
$\occ e\epsilon$) has type $t$ (recall that assuming that the test $e\in t$ fails corresponds to having $\neg t$ at the index of the turnstyle).
The rule \Rule{PApprR} implements occurrence typing for
the arguments of applications, since it states that if a function maps
arguments of type $t_1$ in results of type $t_2$ and an application of
this function yields results (in $t'_2$) that cannot be in $t_2$
(since $t_2\land t_2' \simeq \Empty$), then the argument of this application cannot be of type $t_1$. \Rule{PAppR} performs the
occurrence typing analysis for the function part of an application,
since it states that if an application has type $t_2$ and the argument
of this application has type $t_1$, then the function in this
application cannot have type $t_1\to\neg t_2$. Rules \Rule{PPair\_}
are straightforward since they state that the $i$-th projection of a pair
that is of type $\pair{t_1}{t_2}$ must be of type $t_i$. So are the last two
rules that essentially state that if $\pi_1 e$ (respectively, $\pi_2
e$) is of type $t'$, then the type of $e$ must be of the form
$\pair{t'}\Any$ (respectively, $\pair\Any{t'}$).

This concludes the presentation of our type system, which satisfies
the property of safety, deduced, as customary, from the properties
of progress and subject reduction (\emph{cf.} Appendix~\ref{app:soundness}).
\begin{theorem}[type safety]
For every expression $e$ such that $\varnothing\vdash e:t$ either  $e$
diverges or there
exists a value $v$ of type $t$ such that $e\reduces^* v$.
\end{theorem}






\subsection{Algorithmic system}
\label{ssec:algorithm}
The system we defined in the previous section implements the ideas we
illustrated in the introduction and it is safe. Now the problem is to
decide whether an expression is well typed or not, that is, to find an
algorithm that given a type environment $\Gamma$ and an expression $e$
decides whether there exists a type $t$ such that $\Gamma\vdash e:t$
is provable. For that we need to solve essentially two problems:
$(i)$~how to handle the fact that it is possible to deduce several
types for the same well-typed expression and $(ii)$~how to compute the
auxiliary deduction system for paths.

Multiple types have two distinct origins each requiring a distinct
technical solution.  The first origin is the rule \Rule{Abs-} by which
it is possible to deduce for every well-typed lambda abstractions
infinitely many types, that is the annotation of the function
intersected with as many negations of arrow types as it is possible
without making the type empty. To handle this multiplicity we use and
adapt the technique of \emph{type schemes} defined
by~\citet{Frisch2008}. Type schemes---whose definition we recall in  Section~\ref{sec:type-schemes}---are canonical representations of
the infinite sets of types of $\lambda$-abstractions. The second origin is due
to the presence of structural rules\footnote{\label{fo:rules}In logic, logical rules
  refer to a particular connective (here, a type constructor, that is,
  either $\to$, or $\times$, or $b$), while identity rules (e.g.,
  axioms and cuts) and structural rules (e.g., weakening and
  contraction) do not.} such as \Rule{Subs} and \Rule{Inter}. We
handle this presence in the classic way: we define an algorithmic system that
tracks the miminum type---actually, the minimum \emph{type scheme}---of an
expression; this system is obtained from the original system by removing
the two structural rules and by distributing suitable checks of the subtyping
relation in the remaining rules. To do that in the presence of
set-theoretic types we need to define some operators on types, which are given
in Section~\ref{sec:typeops}.

For what concerns the use of the auxiliary derivation for the $ $
judgments, we present in Section~\ref{sec:typenv} an algorithm that is sound and satisfies a limited form of
completeness. All these notions are then used in the algorithmic typing
system given in Section~\ref{sec:algorules}.

%% \beppe{\begin{enumerate}
%%  \item type of functions -> type schemes
%%   \item elimination rules (app, proj,if) ->operations on types and how to compute them
%%   \item not syntax directed: rules Subs, Inter, Env.
%%   \item Compute the environments for occurrence typing. Algorithm to compute $\Gamma\vdash\Gamma$
%% \end{enumerate}
%% }


\subsubsection{Type schemes}\label{sec:type-schemes}
We introduce the new syntactic category of \emph{types schemes} which are the terms~$\ts$ inductively produced by the following grammar.

\[
\begin{array}{lrcl}
  \textbf{Type schemes} & \ts & ::= & t \alt \tsfun {\arrow t t ; \cdots ; \arrow t t} \alt \ts \tstimes \ts \alt \ts \tsor \ts \alt \tsempty
\end{array}
\]
Type schemes denote sets of types, as formally stated by the following definition:
\begin{definition}[Interpretation of type schemes]
  We define the function $\tsint {\_}$ that maps type schemes into sets of types.\vspace{-3mm}
  \begin{align*}
    \begin{array}{lcl}
    \tsint t &=& \{s\alt t \leq s\}\\
    \tsint {\tsfunone {t_i} {s_i}_{i=1..n}} &=& \{s\alt
    \exists s_0 = \bigwedge_{i=1..n} \arrow {t_i} {s_i}
    \land \bigwedge_{j=1..m} \neg (\arrow {t_j'} {s_j'}).\ 
    \Empty \not\simeq s_0 \leq s \}\\
    \tsint {\ts_1 \tstimes \ts_2} &=& \{s\alt \exists t_1 \in \tsint {\ts_1}\ 
    \exists t_2 \in \tsint {\ts_2}.\ \pair {t_1} {t_2} \leq s\}\\
    \tsint {\ts_1 \tsor \ts_2} &=& \{s\alt \exists t_1 \in \tsint {\ts_1}\ 
    \exists t_2 \in \tsint {\ts_2}.\ {t_1} \vee {t_2} \leq s\}\\
    \tsint \tsempty &=& \varnothing
    \end{array}
  \end{align*}
\end{definition}
Note that $\tsint \ts$ is closed under subsumption and intersection
 and that $\tsempty$, which denotes the
empty set of types is different from $\Empty$ whose interpretation is
the set of all types.

\begin{lemma}[\cite{Frisch2008}]
  Let $\ts$ be a type scheme and $t$ a type. It is possible to decide the assertion $t \in \tsint \ts$,
  which we also write $\ts \leq t$.
\end{lemma}

We can now formally define the relation $v\in t$ used in
Section~\ref{sec:opsem} to define the dynamic semantics of
the language. First, we associate each (possibly, not well-typed)
value to a type scheme representing the best type information about
the value. By induction on the definition of values: $\tyof c {} =
\basic c$, $\tyof {\lambda^{\wedge_{i\in I}s_i\to t_i} x.e}{}=
\tsfun{s_i\to t_i}_{i\in I}$, $\tyof {(v_1,v_2)}{} = \tyof
      {v_1}{}\tstimes\tyof {v_1}{}$. Then we have $v\in t\iffdef \tyof
      v{}\leq t$.
      
We also need to perform intersections of type schemes so as to intersect the static type of an expression (i.e., the one deduced by conventional rules) with the one deduced by occurrence typing (i.e., the one derived by $\vdashp$). For our algorithmic system (see \Rule{Env$_{\scriptscriptstyle\mathcal{A}}$} in Section~\ref{sec:algorules}) all we need to define is the intersection of a type scheme with a type: 
\begin{lemma}[\cite{Frisch2008}]
  Let $\ts$ be a type scheme and $t$ a type. We can compute a type scheme, written $t \tsand \ts$, such that
  \(\tsint {t \tsand \ts} = \{s \alt \exists t' \in \tsint \ts.\ t \land t' \leq s \}\)
\end{lemma}
Finally, given a type scheme $\ts$ it is straightforward to choose in its interpretation a type $\tsrep\ts$ which serves as the canonical representative of the set (i.e., $\tsrep \ts \in \tsint \ts$):
\begin{definition}[Representative]
  We define a function $\tsrep {\_}$ that maps every non-empty type scheme into a type, \textit{representative} of the set of types denoted by the scheme.\vspace{-2mm}
  \begin{align*}
    \begin{array}{lcllcl}
    \tsrep t &=& t  &  \tsrep {\ts_1 \tstimes \ts_2} &=& \pair {\tsrep {\ts_1}} {\tsrep {\ts_2}}\\
    \tsrep {\tsfunone {t_i} {s_i}_{i\in I}} &=& \bigwedge_{i\in I} \arrow {t_i} {s_i} \qquad&    \tsrep {\ts_1 \tsor \ts_2} &=& \tsrep {\ts_1} \vee \tsrep {\ts_2}\\
    \tsrep \tsempty && \textit{undefined}
    \end{array}
  \end{align*}
\end{definition}





\subsubsection{Operators for  type constructors}\label{sec:typeops}

In order to define the algorithmic typing of expressions like
applications and projections we need to define the operators on
types we used in Section~\ref{sec:ideas}. Consider the rule \Rule{App} for applications. It essentially
does three things: $(1)$ it checks that the function has functional
type; $(2)$ it checks that the argument is in the domain of the
function, and $(3)$ it returns the type of the application. In systems
without set-theoretic types these operations are quite
straightforward: $(1)$ corresponds to checking that the function has
an arrow type, $(2)$ corresponds to checking that the argument is in
the domain of the arrow deduced for the function and $(3)$ corresponds
to returning the codomain of that same arrow. With set-theoretic types
things are more difficult since a function can be typed by, say, a
union of intersection of arrows and negations of types. Checking that
the function has a functional type is easy since it corresponds to
checking that it has a type subtype of $\Empty{\to}\Any$. Determining
its domain and the type of the application is more complicated and needs the operators $\dom{}$ and $\circ$ that we informally described in Section~\ref{sec:ideas} where we also described the operator $\worra{}{}$. These three operators are used by our algorithm and are formally defined as follows:
\begin{eqnarray}
\dom t & = & \max \{ u \alt t\leq u\to \Any\} 
\\[-.8mm]
\apply t s & = &\,\min \{ u \alt t\leq s\to u\}
\\[-.8mm]
\worra t s  & = &\,\min\{u \alt t\circ(\dom t\setminus u)\leq \neg s\}\label{worra}
\end{eqnarray}
%In short, $\dom t$ is the largest domain of any single arrow that
%subsumes $t$, $\apply t s$ is the smallest domain of an arrow type
%that subsumes $t$ and has domain $s$ and $\worra t s$ was explained
%before.
We need similar operators for projections since the type $t$
of $e$ in $\pi_i e$ may not be a single product type but, say, a union
of products: all we know is that $t$ must be a subtype of
$\pair\Any\Any$. So let $t$ be a type such that $t\leq\pair\Any\Any$,
then we define:
\begin{equation}
  \begin{array}{lcrlcr}
  \bpl t & = & \min \{ u \alt t\leq \pair u\Any\}\qquad&\qquad
  \bpr t & = & \min \{ u \alt t\leq \pair \Any u\}
\end{array}
\end{equation}
All the operators above but $\worra{}{}$ are already present in the
theory of semantic subtyping: the reader can find how to compute them
and how to extend their definition to type schemes in~\cite[Section
  6.11]{Frisch2008} (see also~\citep[\S4.4]{Cas15} for a detailed description). Below we just show the formula that computes
$\worra t s$ for a $t$ subtype of $\Empty\to\Any$. For that, we use a
result of semantic subtyping that states that every type $t$ is
equivalent to a type in disjunctive normal form and that if
furthermore $t\leq\Empty\to\Any$, then $t \simeq \bigvee_{i\in
  I}\left(\bigwedge_{p\in P_i}(s_p\to t_p)\bigwedge_{n\in
  N_i}\neg(s_n'\to t_n')\right)$ with $\bigwedge_{p\in P_i}(s_p\to
t_p)\bigwedge_{n\in N_i}\neg(s_n'\to t_n') \not\simeq \Empty$ for all
$i$ in $I$. For such a $t$ and any type $s$ then we have:
%
\begin{equation}
\worra t s  =  \dom t \wedge\bigvee_{i\in I}\left(\bigwedge_{\{P\subseteq P_i\alt s\leq \bigvee_{p \in P} \neg t_p\}}\left(\bigvee_{p \in P} \neg s_p\right) \right)
\end{equation}
The formula considers only the positive arrows of each summand that
forms $t$ and states that, for each summand, whenever you take a subset
$P$ of its positive arrows that cannot yield results in 
$s$ (since $s$ does not overlap the intersection of the codomains of these arrows), then
the success of the test cannot depend on these arrows and therefore
the intersection of the domains of these arrows---i.e., the values that would precisely select that set of arrows---can be removed from $\dom t$.  The proof
that this type satisfies \eqref{worra} is given in the
Appendix~\ref{app:worra}.



\subsubsection{Type environments for occurrence typing}\label{sec:typenv}

The last step for our presentation is to define the algorithm for the
deduction of $\Gamma \evdash e t \Gamma'$, that is an algorithm that
takes as input $\Gamma$, $e$, and $t$, and returns an environment that
extends $\Gamma$ with hypotheses on the occurrences of $e$ that are
the most general that can be deduced by assuming that $e\in t$ succeeds. For that we need the notation $\tyof{e}{\Gamma}$ which denotes the type scheme deduced for $e$ under the type environment $\Gamma$ in the algorithmic type system of Section~\ref{sec:algorules}.
That is, $\tyof{e}{\Gamma}=\ts$ if and only if $\Gamma\vdashA e:\ts$ is provable. 

We start by defining the algorithm for each single occurrence, that is for the deduction of $\pvdash \Gamma e t \varpi:t'$. This is obtained by defining two mutually recursive functions $\constrf$ and $\env{}{}$:
  \begin{eqnarray}
    \constr\epsilon{\Gamma,e,t} & = & t\label{uno}\\[\sk]
    \constr{\varpi.0}{\Gamma,e,t} & = & \neg(\arrow{\env {\Gamma,e,t}{(\varpi.1)}}{\neg \env {\Gamma,e,t} (\varpi)})\label{due}\\[\sk]
    \constr{\varpi.1}{\Gamma,e,t} & = & \worra{\tsrep {\tyof{\occ e{\varpi.0}}\Gamma}}{\env {\Gamma,e,t} (\varpi)}\label{tre}\\[\sk]
    \constr{\varpi.l}{\Gamma,e,t} & = & \bpl{\env {\Gamma,e,t} (\varpi)}\label{quattro}\\[\sk]
    \constr{\varpi.r}{\Gamma,e,t} & = & \bpr{\env {\Gamma,e,t} (\varpi)}\label{cinque}\\[\sk]
    \constr{\varpi.f}{\Gamma,e,t} & = & \pair{\env {\Gamma,e,t} (\varpi)}\Any\label{sei}\\[\sk]
    \constr{\varpi.s}{\Gamma,e,t} & = & \pair\Any{\env {\Gamma,e,t} (\varpi)}\label{sette}\\[1.5mm]
    \env {\Gamma,e,t} (\varpi) & = & \constr \varpi {\Gamma,e,t} \land \tsrep {\tyof {\occ e \varpi} \Gamma}\label{otto}
  \end{eqnarray}
All the functions above are defined if and only if the initial path
$\varpi$ is valid for $e$ (i.e., $\occ e{\varpi}$ is defined) and $e$
is well-typed (which implies that all $\tyof {\occ e{\varpi}} \Gamma$
in the definition are defined).\footnote{Note that the definition is
  well-founded.  This can be seen by analyzing the rule
  \Rule{Case\Aa}: the definition of $\Refine {e,t} \Gamma$ and
  $\Refine {e,\neg t} \Gamma$ use $\tyof{\occ e{\varpi}}\Gamma$, and
  this is defined for all $\varpi$ since the first premisses of
  \Rule{Case\Aa} states that $\Gamma\vdash e:\ts_0$ (and this is
  possible only if we were able to deduce under the hypothesis
  $\Gamma$ the type of every occurrence of $e$.)}

Each case of the definition of the $\constrf$ function corresponds to the
application of a logical rule (\emph{cf.} Footnote~\ref{fo:rules}) in
the deduction system for $\vdashp$: case \eqref{uno} corresponds
to the application of \Rule{PEps}; case \eqref{due} implements \Rule{Pappl}
straightforwardly; the implementation of rule \Rule{PAppR} is subtler:
instead of finding the best $t_1$ to subtract (by intersection) from the
static type of the argument, \eqref{tre} finds directly the best type for the argument by
applying the $\worra{}{}$ operator to the static types of the function
and the refined type of the application. The remaining (\ref{quattro}--\ref{sette})
cases are the straightforward implementations of the rules
\Rule{PPairL}, \Rule{PPairR}, \Rule{PFst}, and \Rule{PSnd},
respectively.

The other recursive function, $\env{}{}$, implements the two structural
rules \Rule{PInter} and \Rule{PTypeof} by intersecting the type
obtained for $\varpi$ by the logical rules, with the static type
deduced by the type system for the expression occurring at $\varpi$. The
remaining structural rule, \Rule{Psubs}, is accounted for by the use
of the operators $\worra{}{}$ and $\boldsymbol{\pi}_i$ in
the definition of $\constrf$.

It remains to explain how to compute the environment $\Gamma'$ produced from $\Gamma$ by the deduction system for $\Gamma \evdash e t \Gamma'$. Alas, this is the most delicate part of our algorithm.
%
In a nutshell what we want to do is to define a function
$\Refine{\_,\_}{\_}$ that takes a type environment $\Gamma$, an
expression $e$ and a type $t$ and returns the best type environment
$\Gamma'$ such that $\Gamma \evdash e t \Gamma'$ holds. By the best
environment we mean the one in which the occurrences of $e$ are
associated to the largest possible types (type environments are
hypotheses so they are contravariant: the larger the type the better
the hypothesis).  Recall that in Section~\ref{sec:challenges} we said
that we want our analysis to be able to capture all the information
available from nested checks. If we gave up such a kind of precision
then the definition of $\Refinef$ would be pretty easy: it must map
each subexpression of $e$ to the intersection of the types deduced by
$\vdashp$ (i.e., by $\env{}{}$) for each of its occurrences. That
is, for each expression $e'$ occurring in $e$, $\Refine {e,t}\Gamma$
would be the type environment that maps $e'$ into $\bigwedge_{\{\varpi \alt
  \occ e \varpi \equiv e'\}} \env {\Gamma,e,t} (\varpi)$. As we
explained in Section~\ref{sec:challenges} the intersection is needed
to apply occurrence typing to expression such as
$\tcase{(x,x)}{\pair{t_1}{t_2}}{e_1}{e_2}$ where some
expressions---here $x$---occur multiple times.

In order to capture most of the type information from nested queries
the rule \Rule{Path} allows the deduction of the type of some
occurrence $\varpi$ to use a type environment $\Gamma'$ that may
contain information about some suboccurrences of $\varpi$. On the
algorithm this would correspond to apply the $\Refinef$ defined
above to an environment that already is the result of $\Refinef$, and so on. Therefore, ideally our
algorithm should compute the type environment as a fixpoint of the
function $X\mapsto\Refine{e,t}{X}$. Unfortunately, an iteration of $\Refinef$ may
not converge. As an example consider the (dumb) expression $\tcase
{x_1x_2}{\Any}{e_1}{e_2}$. If $x_1:\Any\to\Any$, then every iteration of
$\Refinef$ yields for $x_1$ a type strictly more precise than the type deduced in the
previous iteration.

The solution we adopt here is to bound the  number of iterations to some number $n_o$. 
From a formal point of view, this means to give up the completeness of the algorithm: $\Refinef$ will be complete (i.e., it will find all solutions) for the deductions of $\Gamma \evdash e t \Gamma'$ of depth at most $n_o$. This is obtained by the following definition of $\Refinef$
\[
\begin{array}{rcl}
  \Refinef_{e,t} \eqdef (\RefineStep{e,t})^{n_o}\\
\text{where }\RefineStep {e,t}(\Gamma)(e') &=&  \left\{\begin{array}{ll}
        %\tyof {e'} \Gamma \tsand
        \bigwedge_{\{\varpi \alt \occ e \varpi \equiv e'\}}
        \env {\Gamma,e,t} (\varpi) & \text{if } \exists \varpi.\ \occ e \varpi \equiv e' \\
        \Gamma(e') & \text{otherwise, if } e'\in\dom\Gamma\\
        \text{undefined} & \text{otherwise}
      \end{array}\right.
\end{array}
\]
Note in particular that $\Refine{e,t}\Gamma$  extends  $\Gamma$ with hypotheses on the expressions occurring in $e$, since
$\dom{\Refine{e,t}\Gamma} = \dom{\RefineStep {e,t}(\Gamma)} = \dom{\Gamma} \cup \{e' \alt \exists \varpi.\ \occ e \varpi \equiv e'\}$.

In other terms, we try to find a fixpoint of $\RefineStep{e,t}$ but we
bound our search to $n_o$ iterations. Since $\RefineStep {e,t}$ is
monotone (w.r.t.\ the subtyping pre-order extended to type environments pointwise), then
  every iteration yields a better solution. 

While this is unsatisfactory from a formal point of view, in practice
the problem is a very mild one. Divergence may happen only when
refining the type of a function in an application: not only such a
refinement is meaningful only when the function is typed by a union
type (which is quite rare in practice)\footnote{\label{foo:typecase}The only impact of
  adding a negated arrow type to the type of a function is when we
  test whether the function has a given arrow type: in practice this
  never happens since programming languages test whether a value
  \emph{is} a function, rather than the type of a given function.},
but also we had to build the expression that causes the divergence in
quite an \emph{ad hoc} way which makes divergence even more unlikely: setting
an $n_o$ twice the depth of the syntax tree of the outermost type case
should be enough to capture all realistic cases \beppe{can we give an estimate
  based on benchmarking the prototype?}




\subsubsection{Algorithmic typing rules}\label{sec:algorules}
We now have all the notions we need for our typing algorithm, which is defined by the following rules.
\begin{mathpar}
  \Infer[Efq\Aa]
  { }
  { \Gamma, (e:\Empty) \vdashA e': \Empty }
  { \begin{array}{c}\text{\tiny with priority over}\\[-1.8mm]\text{\tiny all the other rules}\end{array}}
  \qquad
  \Infer[Var\Aa]
      { }
      { \Gamma \vdashA x: \Gamma(x) }
      { x\in\dom\Gamma}
  \vspace{-2mm}\\
  \Infer[Env\Aa]
      { \Gamma\setminus\{e\} \vdashA e : \ts }
      { \Gamma \vdashA e: \Gamma(e) \tsand \ts }
      { \begin{array}{c}e\in\dom\Gamma \text{ and }\\[-1mm] e \text{ not a variable}\end{array}}
  \qquad
  \Infer[Const\Aa]
      { }
      {\Gamma\vdashA c:\basic{c}}
      {c\not\in\dom\Gamma}
  \vspace{-2mm}\\
  \Infer[Abs\Aa]
      {\Gamma,x:s_i\vdashA e:\ts_i'\\ \ts_i'\leq t_i}
      {
      \Gamma\vdashA\lambda^{\wedge_{i\in I}\arrow {s_i} {t_i}}x.e:\textstyle\tsfun {\arrow {s_i} {t_i}}_{i\in I}
      }
      {\lambda^{\wedge_{i\in I}\arrow {s_i} {t_i}}x.e\not\in\dom\Gamma}
  \vspace{-2mm}\\
  \Infer[App\Aa]
      {
        \Gamma \vdashA e_1: \ts_1\\
        \Gamma \vdashA e_2: \ts_2\\
        \ts_1 \leq \arrow \Empty \Any\\
        \ts_2 \leq \dom {\ts_1}
      }
      { \Gamma \vdashA {e_1}{e_2}: \ts_1 \circ \ts_2 }
      { {e_1}{e_2}\not\in\dom\Gamma}
  \vspace{-2mm}\\
  \Infer[Case\Aa]
        {\Gamma\vdashA e:\ts_0\\
        %\makebox{$\begin{array}{l}
        %  \left\{
        %    \begin{array}{ll} %\Gamma,
        %    \Refine + {e,t} \Gamma \vdashA e_1 : \ts_1 & \text{ if } \ts_0 \not\leq \neg t\\
        %    \ts_1 = \Empty & \text{ otherwise}
        %  \end{array}\right.\\
        %  \left\{
        %    \begin{array}{ll} %\Gamma,
        %    \Refine - {e,t} \Gamma \vdashA e_2 : \ts_2 & \text{ if } \ts_0 \not\leq t\\
        %    \ts_2 = \Empty & \text{ otherwise}
        %  \end{array}\right.
        %\end{array}$}
        \Refine {e,t} \Gamma \vdashA e_1 : \ts_1\\
        \Refine {e,\neg t} \Gamma \vdashA e_2 : \ts_2}
        {\Gamma\vdashA \tcase {e} t {e_1}{e_2}: \ts_1\tsor \ts_2}
        %{\ite {e} t {e_1}{e_2}\not\in\dom\Gamma}
        { \tcase {e} {t\!} {\!e_1\!}{\!e_2}\not\in\dom\Gamma}
  \vspace{-2mm}  \\
  \Infer[Proj\Aa]
  {\Gamma \vdashA e:\ts\and \!\!\ts\leq\pair{\Any\!}{\!\Any}}
  {\Gamma \vdashA \pi_i e:\bpi_{\mathbf{i}}(\ts)}
  {\pi_i e{\not\in}\dom\Gamma}\hfill
  \Infer[Pair\Aa]
  {\Gamma \vdashA e_1:\ts_1 \and \!\!\Gamma \vdashA e_2:\ts_2}
  {\Gamma \vdashA (e_1,e_2):{\ts_1}\tstimes{\ts_2}}%\pair{t_1}{t_2}}
  {(e_1,e_2){\not\in}\dom\Gamma}
\end{mathpar}
The side conditions of the rules ensure that the system is syntax
directed, that is, that at most one rule applies when typing a term:
priority is given to \Rule{Eqf\Aa} over all the other rules and to
\Rule{Env\Aa} over all remaining logical rules. Type schemes are
used to account the type-multiplicity stemming from
$\lambda$-abstractions as shown in particular by rule \Rule{Abs\Aa}
(in what follows we use the word ``type'' also for type schemes). The
subsumption rule is no longer in the system; it is replaced by: $(i)$
using a union type in \Rule{Case\Aa}, $(ii)$ checking in \Rule{Abs\Aa}
that the body of the function is typed by a subtype of the type
declared in the annotation, and $(iii)$ using type operators and
checking subtyping in the elimination rules \Rule{App\Aa,Proj\Aa}. In
particular, for \Rule{App\Aa} notice that it checks that the type of
the function is a functional type, that the type of the argument is a
subtype of the domain of the function, and then returns the result
type of the application of the two types. The intersection rule is
replaced by the use of type schemes in \Rule{Abs\Aa} and by the rule
\Rule{Env\Aa}. The latter intersects the type deduced for an
expression $e$ by occurrence typing and stored in $\Gamma$ with the
type deduced for $e$ by the logical rules: this is simply obtained by
removing any hypothesis about $e$ from $\Gamma$, so that the deduction
of the type $\ts$ for $e$ cannot but end by a logical rule. Of course
this does not apply when the expression $e$ is a variable, since
an hypothesis in $\Gamma$ is the only way to deduce the type of a
variable, which is a why the algorithm reintroduces the classic rules
for variables.

The algorithmic system above is sound with respect to the deductive one of Section~\ref{sec:static}
\begin{theorem}[Soundness]
For every $\Gamma$, $e$, $t$, $n_o$, if $\tyof e \Gamma \leq t$, then $\Gamma \vdash e:t$.
\end{theorem}
We were not able to prove full completeness, just a partial form of it. As
anticipated, the problems are twofold: $(i)$ the recursive nature of
rule \Rule{Path} and $(ii)$ the use of nested \Rule{PAppL} that yield
a precision that the algorithm loses by applying \tsrep{} in the
definition of \constrf{} (case~\eqref{due} is the critical
one). Completeness is recovered by $(i)$ limiting the depth of the
derivations and $(ii)$ forbidding nested negated arrows on the
left-hand side of negated arrows.\vspace{-.7mm}
\begin{definition}[Rank-0 negation]
A derivation of $\Gamma \vdash e:t$ is \emph{rank-0 negated} if \Rule{Abs--} never occurs in the derivation of a left premise of a \Rule{PAppL} rule.\vspace{-.7mm}
\end{definition}
\noindent The use of this terminology is borrowed from the ranking of higher-order
types, since, intuitively, it corresponds to typing a language in
which  in the types used in dynamic tests, a negated arrow never occurs  on the
left-hand side of another negated arrow.
\begin{theorem}[Partial Completeness]
For every $\Gamma$, $e$, $t$, if $\Gamma \vdash e:t$ is derivable by a rank-0 negated derivation, then there exists $n_o$ such that ${\tyof e \Gamma} \leq t$.
\end{theorem}
\noindent The use of type schemes and of possibly diverging  iterations
yield a system that may seem overly complicated. But it is important
to stress that this systems is defined only to study the
type inference system of Section~\ref{sec:static} and in particular to prod
how close we can get to a complete algorithm for it. But for the
practical application type schemes are not needed, since they are
necessary only when type cases may specify types with negative arrows
and this in practice never happens (see Footnote~\ref{foo:typecase} and Corollary~\ref{app:completeness}). This is why for our implementation we use the
CDuce library in which type schemes are absent and functions are typed
only by intersections of positive arrows. We present the implementation in Section~\ref{sec:practical}
but before let us study some extensions.